KUNSHAN WONDERTEK TECHNOLOGY CO.,LTD.

Smooth communication makes intelligent life!

Manufacturer from China
Active Member
9 Years
Home / Products / Powerline Ethernet bridge /

1200Mbps DIN rail industrial poweline ethernet bridge PLC ethernet adapter

Contact Now
KUNSHAN WONDERTEK TECHNOLOGY CO.,LTD.
Country/Region:china
Contact Person:MrTong Wang
Contact Now

1200Mbps DIN rail industrial poweline ethernet bridge PLC ethernet adapter

Ask Latest Price
Brand Name :Wondertek
Model Number :WD-1201M-DIN
Certification :FCC CE Rohs
Place of Origin :China
MOQ :2
Price :USD400
Payment Terms :T/T
Contact Now

Add to Cart

Find Similar Videos
View Product Description
Model WD-1001M-DIN(T/V) WD-1001M-DIN(D)
Interface 1*LAN 10/100/1000Base-TX self adaption RJ45,1*AC power interface MDI/MDX support 1*LAN 10/100/1000Base-TX self adaption RJ45,1*DC power interface MDI/MDX support
LED display light Ethernet, PLC link ,power
Transfer band 25,50 and 100MHz and MIMO (based on G.9963)
Protocol(PHY) IEEE802.3,IEEE802.3x, IEEE802.3u G.Hn
Security 128-AES
Transfer rate(PHY) 800Mbps
Modulation OFDM
Effective transfer rate TCP/IP 400Mbps
Manageability Remote Firmware update,support TR-069(optional)
802.1D Ethernet Bridge
802.1Q VLAN
Quality of Service(QoS)
IGMO(IPv4)Snooping&MLD(IPv6)Snooping
Working voltage AC 90V-520V

18-75VDC

100V-700VDC

Operating temperature -40℃-80℃
Size 120*89*44 (mm)(L×W×H)(not include installation hook)
Weight 0.35kg 0.30kg
Operating environment Operating humidity:10%-85% (no condense)
Storage humidity: 5%-90%(no condense)
Certification FCC,CE class B,WEEE,RoHS

Features

Packet loss:≤0.1%(100M,load 70%)
Support 7*24 hours all weather operation
hardware watch dog function
PING≤2MS

The quantity of the group ≤16pcs

Immunity of ESD

The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.

Immunity of electrical fast transient impulse group(Common mode)

The testing voltage which the device should be beared: between the power supply voltage port and ground: ±2.0kV, between signal circuit and ground: ±1.0kV, repetition frequency: 5KHz, test duration: 1 min/ time, testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008.

Anti interference of surge impact

The testing voltage which the device should be beared: ±2kV, the interval of continuous impulses: 1min/time. Test number: Plus-n-Minus 5 times each. According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)

Anti- vibration

Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.

Inquiry Cart 0